SLIMLINE – Telecom DC Power Supply System

smart, flexible and modular • highly efficient and reliable • cost-effective

SLIMLINE – Telecom DC Power Supply System

You are here:

Reliable Cost-effective Solutions – Made in Germany

SLIMLINE SYSTEM 48 V / 262 kW
SLIMLINE SYSTEM 48 V / 262 kW

It has become normal within our modern society to use a wide variety of electronic media for instantaneous contactability, communication, process control and transactions.

In order to always be in touch, permanently available network access is required whose backbone is formed by the nationwide roll-out of high-speed wireless data networks such as LTE and, in future, 5G. The requisite telecommunications technology requires there to be a reliable power supply which is operational at all times.

BENNING has delivered battery-powered AC and DC power supplies to many mobile phone and landline operators around the world for decades and has made particular investments in the development of high-efficiency power supplies for energy-saving, reliable operation. Nowadays, BENNING ranks as one of the leading suppliers of high-efficiency power supplies for the secure operation of information, telecommunications and industrial technology systems.

The new SLIMLINE series covers the entire array of mobile radio applications, from the mobile switching center (MSC for short) to the base station controller (BSC) to individual base transceiver stations (BTS). Consequently, the power supply systems safeguard the entire transmission technology (LTE, 4G, VOIP, TV, servers, etc.) against power failures.

The most cost-effective solution for every requirement

SLIMLINE system 48 V / 4 kW with a controller module, as well as battery and consumer distribution
SLIMLINE system 48 V / 4 kW with a controller module, as well as battery and consumer distribution

Low power ratings of up to 4000 W

The smallest rated low-power telecommunications power supply system, SLIMLINE PSU 4000, has a maximum of two rectifier modules 48 V / 2000 W, a controller, as well as the battery  and consumer distribution integrated into a 19” 1H SLIMLINE carrier.

SLIMLINE system 48 V / 22 kW with a controller module
SLIMLINE system 48 V / 22 kW with a controller module

Medium power ratings of up to 32 kW

System power ratings of 10 kW (with a controller module) or 12 kW in only one module height can be achieved with a rack which is fully configured with rectifiers for the medium output range, which includes mobile radio stations for example.

The power rating can be increased to up to 22 kW by connecting a second SLIMLINE carrier in parallel (see Fig. 5) and to up to 32 kW by connecting a third SLIMLINE carrier, including a controller module.

SLIMLINE system 48 V / 10 kW with a SLIMLINE controller, as well as battery and consumer distribution. Power ratings of 2 - 32 kW can be achieved by scaling the rectifiers and adapting the distribution.
SLIMLINE system 48 V / 10 kW with a SLIMLINE controller, as well as battery and consumer distribution. Power ratings of 2 - 32 kW can be achieved by scaling the rectifiers and adapting the distribution.

Battery and consumer distribution units of different outputs are available for all power ranges, guaranteeing a compact, space-saving system.

The distribution units are also structured in 19” plug-in units and each comprise one or three height units, depending on the output power.

High power ratings of up to 400 kW

Larger power ratings, such as those required in nodes and distribution stations, can be achieved by connecting multiple SLIMLINE carriers in parallel. This enables power ratings of up to 400 kW to be achieved. The systems are integrated into 19” cabinet systems which can also house batteries and distribution units. 

The SLIMLINE controller is available for more extensive control and monitoring functions.

SLIMLINE – cost-effective operation and maximum availability

Maximum availability

Maximum availability

  • maximum availability
    • very high reliability
    • low mean time to repair (MTTR)
    • reliable hot swap modularity
    • decentralised parallel architecture
    • remote monitoring via TCP/IP
  • superior supply quality
    • sinusoidal input current, no reactive-power absorption (power factor ≥ 0.99)

Highest Economic Efficiency

Highest Economic Efficiency

  • low operating costs
    • high efficiency > 97% even at partial load
    • extremely high power density and, thus, low space requirements at the installation site
    • sustainable investment reliability through pay-as-you-grow scalability up to 400 kW
    • automatic synchronisation of the rectifier modules during replacement and retrofitting
    • low expenditure for installation, commissioning and expansion

Flexible component concept

Flexible component concept

The modular concept significantly lowers the cost and time expenditure in the installation and maintenance of the new SLIMLINE telecommunications power supplies at wireless sites which are being newly built or converted.

Flexible scalability up to 400 kW

The SLIMLINE system is simply scalable and can grow in line with customer requirements – from 2 to 400 kW. Due to the high degree of modularisation, it is possible to plan, configure and deliver customised systems at very short notice.

Hot-Plug

All modules can be replaced during ongoing operation (hot plug). The SLIMLINE carrier with the appropriate quantity of rectifier modules and the assigned battery and consumer distribution create a complete, modular SLIMLINE power supply system.

Maximum operational reliability, minimum operating costs

The 19” 1H carrier can accommodate either five 48 V and 2000 W rectifier modules combined with a controller or six rectifier modules.
The 19” 1H carrier can accommodate either five 48 V and 2000 W rectifier modules combined with a controller or six rectifier modules.

The newly developed SLIMLINE power supply solutions are precisely tailored to the requirements of the telecommunications network operator.

They include:

  • optimum operational reliability
  • maximum energy efficiency
  • optimum user space
  • flexibility (pay as you grow)
  • modularity

 

They not only contribute significantly to the low total cost of ownership (TCO), they are also the basis for a clear reduction in installation and assembly times, as well as for simpler and more efficient maintenance possibilities in later operation.

Only one type of rectifier is required for systems within a power range of 2 kW to 400 kW. This simplifies stock management and logistics for the benefit of the owner as it is only required to keep one type of module in stock for all systems.

Optimum energy efficiency in the minimum user space

Individual rectifier modules with an output of 2000 W are available for creating complete power supply systems. The 19” 1H carrier can accommodate either five 48 V / 2000 W rectifier modules combined with a monitoring and control unit (SLIMLINE controller) or six rectifier modules. This gives a power rating of 10 kW or 12 kW per rack. 

Efficiency in relation to the output power
Efficiency in relation to the output power

In this series of high-efficiency rectifiers, the power loss which occurs in the transformation of energy from alternating current to direct current has been reduced by up to 30% compared to the previous model. At the same time, the overall physical footprint of the rectifiers has been reduced by more than 33%.

A particularly impressive fact is that the SLIMLINE series works at efficiency in excess of 97% across a load range of between 50% and 90%.

This creates substantial savings for telecommunications service providers which operate a number of systems in the field. Optionally, active power management can be enabled which determines the load required and automatically connects or disconnects the rectifier modules accordingly.

SLIMLINE controller – remote monitoring and reliability in a very compact space

The SLIMLINE controller is available for extensive control and monitoring functions. This is generally inserted into the SLIMLINE carrier as a module in the case of low power ratings. The 19” 1H carrier can accommodate either five 48 V / 2000 W rectifier modules combined with a controller module or six rectifier modules. In the case of power supplies with a greater power rating, the monitoring and control unit can be integrated into the cabinet door of the power supply system.

The controller monitors the entire power supply system and controls the power management for example. The system is structured to ensure that the power supply remains operational in the event of controller failure. The rectifiers continue to supply the system and the batteries, which is why the power remains at 100%. Therefore, failure is not critical to the process, and there is no need for controller redundancy. This lessens the space required and reduces investment and operating costs. Needless to say, a message appears in the event of a controller failure so that prompt steps can be taken to have the controller module replaced by a service technician at short notice.

The front of the new SLIMLINE controller module has a 1.8” display, a USB 2.0 port (to accommodate a WLAN stick, for instance), as well as an Ethernet port.
The front of the new SLIMLINE controller module has a 1.8” display, a USB 2.0 port (to accommodate a WLAN stick, for instance), as well as an Ethernet port.
In the case of systems with a larger power rating, the SLIMLINE controller can be inserted into the cabinet door of the power supply system. This design has a 10.4” touch display.
In the case of systems with a larger power rating, the SLIMLINE controller can be inserted into the cabinet door of the power supply system. This design has a 10.4” touch display.

It is easy to operate by computer, tablet or smartphone

In theory, the system can be configured via the integrated colour display on the front. If there is a mobile device or computer available, the configuration can take place conveniently via a network connection and Internet browser (see figure above). There is no further software required. By consistently matching operation to the requirements of the user delivers all the most beneficial measurements and settings with clarity, precision and simplicity.

The high contrast, bright display of the SLIMLINE controller also functions as a visual alert. If a fault occurs, it is fully illuminated in red and is clearly visible from a distance.

In the case of the SLIMLINE controller modules which are inserted in the racks, five methods of connectivity are integrated into only one sixth of the 19” width, for example an SNMP adapter and the modbus which is addressable via the RS-485 port or the network. It also includes a modem connection which is supplied via an RS-232 port and the 12 V feed.

Further Information

Brochures
Case studies

Your contact persons

RUS

OOO Benning Power Electronics

tel

+7 4 95 / 9 67 68 50

address

Domodedovo town,
microdistrict Severny,
"Benning" estate, bldg.1
142000 Moscow Region
Russian Federation

RUS

OOO Benning Power Electronics

Филиал в г. Санкт-Петербург

tel

+7 812 346 43 66

web

www.benning.ru

address

197136, РФ, г. Санкт-Петербург,
ул. Ординарная, д.20, лит.А, пом. 12Н

RUS

OOO Benning Power Electronics

Филиал в г. Уфа

tel

+ 7 347 274 29 29

mobile

+ 7 347 246 33 74

web

www.benning.de

address

450057, РФ, г. Уфа,
ул. Заки Валиди, д.64/2, офис 406

RUS

OOO Benning Power Electronics

Филиал в г. Новосибирск

tel

+ 7 383 219 52 10

web

www.benning.ru

address

630087, РФ, г. Новосибирск,
ул. Немировича-Данченко, д.165, офис 324