ENERTRONIC I Collage industrial version

UPS ENERTRONIC I

  • For industrial applications
  • Single-phase and three-phase output
  • Reliable
  • Economical
Read more ...
BENNING ENERTRONIC I cabinet and touch display close-up

Reliable system technology

UPS ENERTRONIC I – 10 to 500 kVA

Maintaining operations safely – even in the event of grid disturbances or failures

Information and data technologies as well as increasingly automated production processes with complex data networking (Industry 4.0) require a reliable and trouble-free power supply.

For the supply of critical consumers, which require a voltage independent of disturbances of the public network, such as Petrochemical plants, Refineries, Power plants and substations, Process computers, Control rooms and SCADA systems should therefore use robust, uninterruptible power supplies (UPSs).

Maximum safety and economic efficiency

The UPS ENERTRONIC I complies with the highest UPS classification VFI SS 111 according to IEC / EN 62040-3 and stands for maximum safety and economic efficiency, based on the following features:

  • IGBT power semiconductors in the rectifier and inverter
  • Input power factor of ≥ 0.99
  • Mains feedback (THDi) < 5 %
  • Excellent control characteristics for high voltage stability, even with large load changes
  • Electronic changeover unit (EUE) and internal service bypass
  • Extensive reporting and monitoring functions
High short-circuit current

It is optionally possible to design the inverter for a three-phase short-circuit current of up to 4 x I-Nominal (ENERTRONIC I 3-3: 1ph 7 x IN, 3ph 4 x IN or ENERTRONIC I 3-1: 1ph 6 x IN). Depending on the power, a larger cabinet may be necessary.

Improvement in voltage and frequency quality

The static UPS system not only has the task of supplying the connected loads continuously and without interruption, but also achieves a significant improvement in voltage and frequency quality compared to the normal network.

Scalable and redundant

Up to 8 units of the ENERTRONIC I series can be connected in parallel for redundancy purposes or to increase power. It works with an active load sharing function in active and passive master mode.

UPS ENERTRONIC I – for enhanced safety

Due to the high load on the public power supply system caused by feedback from large consumers, switching on during peak consumption periods or lightning strikes, irregularities cannot be prevented. This results in voltage dips, overshoots and transients of the public grid voltage.

By placing your trust in a BENNING UPS system, you are choosing a high-quality product from one of the world’s leading manufacturers of AC and DC power supplies.

Designed to meet the needs of the industry

Industrial plants
Modern industrial technology with a robotic Arm in an automated production cell
Reliable & economical
  • UPS classification VFI SS 111 according to IEC / EN 62040-3
  • Excellent control characteristics for high voltage stability, even with large load changes
  • Protection for process computers and SCADA systems
Energy suppliers and network operators
UPS system energy supplier power pole in blue
Guarantee grid stability and supply security with a UPS system for operation-critical processes
  • Safe & reliable
  • Extensive reporting and monitoring functions
  • Ideal for use in Power plants and substations (Control rooms, SCADA systems)
Petrochemical plants and refineries
Yokkaichi industrial complex, night view of the factory
For harsh environmental conditions, built from robust components
  • IGBT power semiconductors in the rectifier and inverter
  • Electronic changeover unit (EUE) and internal service bypass
  • Extensive reporting and monitoring functions
Data/IT
Worker sits in front of an IT control panel
The UPS ENERTRONIC I complies with the highest UPS classification VFI SS 111 according to IEC / EN 62040-3 and stands for maximum safety, economic efficiency and excellent voltage stability e.g. for:
  • Control rooms
  • Process computers
  • SCADA systems
Transport and traffic
Passenger plane fly up over take-off runway from airport
Reliable when it counts, ideal for the secure power supply of control rooms and SCADA systems.
  • Excellent control characteristics for high voltage stability, even with large load changes
  • Electronic changeover unit (EUE) and internal service bypass
  • Extensive reporting and monitoring functions
UPS ENERTRONIC I brochure on a desk with coffee and BENNING pen
Uninterruptible power supply with single-phase and three-phase output, ideal for e.g.:
  • Petrochemical plants, Refineries
  • Power plants and substations
  • Process computers, Control rooms and SCADA systems

Built from robust, reliable components

UPS Equipment Collage - Oil and Gas

In normal operation, the consumer is supplied by the functional chain transformer, rectifier, inverter and output transformer.

Modern power electronics for economical operation

Rectifier

IGBT semiconductor rectifier bridge
The rectifier consists of an IGBT semiconductor rectifier bridge with power factor correction (power factor = 1), which converts the three-phase supply voltage into a regulated DC voltage to feed the inverter. At the same time, the connected battery is charged or always kept at the optimum state of charge in float charge mode. The rectifier is dimensioned in such a way that it can simultaneously supply the fully loaded inverter and, after a mains failure, recharge the discharged battery to approx. 95 % of the battery capacity in a time of approx. 12 hours.

Start-up delay with soft start
The rectifier has a start-up delay with soft start to ramp up the starting current after a mains failure. When parallel systems are switched on again, a series switch-on delay is automatically activated to limit the switch-on current to that of a single rectifier.

Charging current and voltage limitation
The rectifier has a charging current and voltage limitation according to the battery supplier’s specifications. A temperature-compensated charging characteristic can be integrated as an option.

Thyristor rectifier (SCR) optionally
Instead of the IGBT rectifier, a thyristor rectifier (SCR) can optionally be installed. This may require additional input filters depending on the targeted THDi.

Inverter

Sinusoidally optimised pulse width control
In the inverter, the DC voltage is converted into a single-phase voltage (ENERTRONIC I 3-1) or three-phase voltage (ENERTRONIC I 3-3) by means of sinusoidally optimised pulse width control via the IGBT semiconductors and the output isolating transformer.

Excellent dynamic behaviour if the load changes
Due to the high switching frequency in relation to the fundamental frequency as well as the optimal control of the pulse width, a very good efficiency and a very low distortion factor with non-linear load is achieved even in the partial load range. This also favours the excellent dynamic behaviour if the load changes.

Battery monitoring and automatic switchover
In the event of mains dips or failures, the battery connected to the DC input is automatically used to supply power without interruption. The discharge of the battery is reported. If the discharge threshold of the battery is not reached, the inverter switches off automatically and a message is displayed shortly before the end-of-discharge voltage is reached.

An automatic switchover of the loads to the bypass grid or a corresponding replacement system takes place when the supply by the inverter is no longer guaranteed within the specified tolerances.

Static bypass switch (SBS)

Various switching options
The SBS enables the loads to be switched to mains supply (bypass mains) without interruption – in compliance with the specified tolerances. The changeover can be triggered automatically by a control signal or manually by means of a button.

Safe operation and functionality
The monitoring is autonomous and prevents faulty operation of the system as well as any illogical switching functions of the SBS. For example, any uninterruptible switching, whether automatic or manual, is only possible if the voltage, frequency and phase position of the inverter are synchronised with the bypass grid. Mains frequency deviations that lie outside the specified tolerances cause a changeover block or, in the event of inverter failure, a changeover with interruption.

The SBS consists of a static, microprocessor-controlled and anti-parallel thyristor set in the mains bypass. automatically switches the connected loads to the mains without interruption in the event of a corresponding deviation of the output voltage from the set values. It automatically switches the load back to the inverter when an overload or short circuit has occurred and normal operation is available again.

Manual bypass

Internal manual bypass
The UPS system is equipped with an internal maintenance bypass (manual bypass) with a manually operated switch. The consumers are then supplied directly from the grid. With the option of an external manual bypass cabinet, the entire UPS can be de-energised, e.g. for recurring tests.

Remote Monitoring System MCU 3000

BENNING ENERTRONIC I touchdisplay
Modernes 10“ Touchdisplay mit einer intuitiven Benutzerführung durch ein von BENNING optimiertes User-Interface

Touch panel

  • Graphical interface with display of energy flow and plant status
  • Support of all common written languages
  • Event monitor for the last 8000 events. Complete documentation of date, time and message in plain text
  • Customisable
  • Function setting of the remote control and adjustment of the operating parameters

Can be connected in parallel with Group-Connector

Up to 8 units of the ENERTRONIC I series can be connected in parallel for redundancy purposes or to increase power. It works with an active load sharing function in active and passive master mode.

The Group Connector makes it possible to operate two UPS systems individually or in parallel. If half-load parallel operation is implemented with the aid of a coupling switch on two busbars, it is possible to read in the switch position during operation via an auxiliary contact.

When the tie breaker is closed, the load is distributed to both UPS systems – when the tie breaker is open, the UPS systems supply the respective connected rail. A secure supply to the load is thus ensured at all times.

UPS ENERTRONIC I 40 kVA and UPS ENERTRONIC I 120 kVA in one row
UPS ENERTRONIC I 40 kVA and UPS ENERTRONIC I 120 kVA
BENNING UPS ENERTRONIC modular SE front view
ENERTRONIC modular SE

Highest availability UPS-Systems with Modular Hot-Plug Design

  • Scalable (pay as you grow)
  • Maximum availability for process-critical applications
One contact person for the entire project
BENNING – One contact person during the entire product lifecycle
  • You get the most economical solution and benefit in the long term from the direct link to BENNING as the manufacturer.
  • Quality made in Germany
IMS - Integrated Management System Logo
IMS - Integrated Management System
  • Quality Management
  • Environmental Management
  • Occupational Safety and Health Protection

Downloads

Contact request

If you need help choosing the right product for you or have any other questions, allow us to advise you - please call or email us:

Detailed information on handling user data can be found in our data protection declaration.

Please add 1 and 1.

BENNING - your contact for UPS systems, industrial UPS systems and uninterruptible power supplies. If you would like to buy one or more UPS systems then contact us! Benefit from modern power electronics and flexible scalability as well as our all-round service and the quality "Made in Germany" for UPS systems.

Contact Persons

Your contact persons

Where are you from? Select your country of origin from the list below, to quickly find your personal contact person.

BENNING Subsidiaries - Find your contact person by clicking on the corresponding flag.

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
tel

+49 2871 930

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Nord
tel

+49 33708 31874

fax

+49 33708 31876

address

Ludwig-Erhard-Ring 18a
15827 Dahlewitz
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung West
tel

+49 2871 93513

fax

+49 2871 936513

address

Auf der Brede 60
42477 Radevormwald
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Ost
tel

+49 35245 728544

tel

+49 172 2859286

address

01665 Klipphausen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Süd
tel

+49 8332 936363

fax

+49 8332 936364

address

Bahnhofstr. 26
87749 Hawangen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Soest
tel

+49 2921 9819020

fax

+49 2871 936211

address

59494 Soest
Germany

USA BENNING Power Electronics, Inc.
Technical Support Hotline
tel

+1 800 910 3601

USA BENNING Power Electronics, Inc.
Services Support
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
BENNING US Sales
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
Customer Helpdesk
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

ARG BENNING Conversion de Energía
Ricardo Hartbrecht
tel

+54 911 4937 4987

address

(B1653CIO) Villa Ballester,
BUENOS AIRES

AUT BENNING GmbH Elektrotechnik und Elektronik
Vertrieb Österreich
tel

+43 (0) 2242-32416-0

web

www.benning.at

address

Eduard-Klinger-Str. 9
3423 St. Andrä-Wördern
Austria

BEL BENNING Belgium branch of BENNING Vertriebsges. mbH
tel

+32 (0) 2 / 5 82 87 85

address

Wayenborgstraat 19
2800 Mechelen
Belgium

BEL BENNING Belgium branch of BENNING Vertriebsges. mbH
Technical Support & Service
tel

+32 (0) 2 / 5 82 87 85

address

Wayenborgstraat 19
2800 Mechelen
Belgium

BLR OOO «BENNING Elektrotechnik und Elektronik»
tel

+375 162 512 512

address

Masherova Ave., 6A, 1003
224030 Brest
Belarus

BRA BENNING Conversión de Energía S. A.
Paulo C. Anacleto [Manager – Brazil]
tel

+55 19 98270 0303

address

Campinas BRAZIL

CRO BENNING Zagreb d.o.o.
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CRO BENNING Zagreb d.o.o.
Kresimir Kauric
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CZE BENNING CR, s.r.o.
tel

+420 / 3 26 72 10 03

address

Zahradní ul. 894
293 06 Kosmonosy
Czech Republic

CHN BENNING Power Electronics Beijing Co., Ltd.
tel

+86 (0) 10 / 61 56 85 88

fax

+86 (0) 10 / 61 50 62 00

address

No. 6 Guangyuan Dongjie
Tongzhou Industrial
Development Zone
101113 Beijing
P.R. China

FRA BENNING conversion d’énergie
tel

+33 (0) / 2 32 25 23 94

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

FRA BENNING conversion d’énergie
Nicolas Rougerie [Sales Manager France]
tel

+33 (0) 2 32 25 14 26

mobile

+33 (0) 6 46 71 42 60

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

FRA BENNING conversion d’énergie
Isabelle Guillot [Sales Executive for Spares and testing instruments for France, Africa & Middle East]
tel

+33 (0) 2 32 25 12 72

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

ARE BENNING Power Systems Middle East
Aznad Khaleel [Sales Manager for Saudi Arabia and Oil & Gaz Middle East]
tel

+971 (0) 2 5463063

mobile

+971 (0) 50 1766972

address

Unit No. 225, Second Floor - Al Fahim Building,
10th Street - Block M4 Mussafah
Abu Dhabi
UAE

FRA BENNING conversion d’énergie
Soufiane Aït Amara [Sales Director France & Africa]
tel

+33 (0) 2 77 68 60 18

mobile

+33 (0) 6 42 71 36 38

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

FRA BENNING conversion d’énergie
Aziz Saber [Sales Manager Africa]
tel

+33 2 77 68 60 14

mobile

+33 6 88 35 23 46

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

ARE BENNING Power Systems Middle East
Hari Kumar Raman Pillai [Managing Director for Middle East]
tel

+971 (0) 2 5463063

mobile

+971 545 987 987

address

Unit No. 225, Second Floor - Al Fahim Building,
10th Street - Block M4 Mussafah
Abu Dhabi
UAE

GBR BENNING Power Electronics UK Ltd
Info
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Service
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Sales
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Service
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GRE BENNING Hellas
BENNING Hellas
tel

+30 210 5741137

fax

+30 210 5782554

web

www.benning.gr

address

Chanion 1, Lykovrisi
141 23 Athens
Greece

HUN BENNING Kft. Power Electronics
tel

+36 (0) 33 / 50 76 00

address

Rákóczi út 145
2541 Lábatlan
Hungary

IRL Laor Energy (1993) L.T.D.
tel

+972 9 8912232

web

http://laor-energy.com

address

POB 5026
North Industrial Zone
60920 KADIMA

ITA BENNING Conversione di Energia S.r.L
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Casalecchio di Reno (BO)
Italy

ITA BENNING Conversione di Energia S.r.L
Giuliano Rossi
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Casalecchio di Reno (BO)
Italy

ITA BENNING Conversione di Energia S.r.L
Antonio Romeo [Area Manager]
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Casalecchio di Reno (BO)
Italy

ITA BENNING Conversione di Energia S.r.L
Alessandro Nalbone [Managing Director]
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Casalecchio di Reno (BO)
Italy

NED BENNING NL branch of BENNING Vertriebsges. mbH
Technical Support & Service
tel

+31 (0) 30 / 6 34 60 13

address

Peppelkade 42
3992 AK Houten
Netherlands

NED BENNING NL branch of BENNING Vertriebsges. mbH
tel

+31 (0) 30 / 6 34 60 10

address

Peppelkade 42
3992 AK Houten
Netherlands

POL BENNING Power Electronics Sp. z o.o.
tel

+48 (0) 22 / 7 57 84 53

address

Korczunkowa 30
05-503 Glosków
Poland

SRB BENNING Power Electronics doo
tel

+381 11 3 16 14 29

address

Dunavskih Virova 5
11186 Beograd
Serbia

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

ESP BENNING Conversión de Energía S.A.
tel

+34 91 / 6 04 81 10

address

C/Pico de Santa Catalina 2
Pol. Ind. Los Linares
28970 Humanes, Madrid
Spain

SWE BENNING Sweden AB
Order och leveransinformation
tel

+46 (8) 623 95 16

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
Teknisk support, reservdelar
tel

+46 (8) 623 95 89

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
tel

+46 (8) 6239500

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Sweden

SWE BENNING Sweden AB
Försäljning
tel

+46 (8) 623 95 79

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

DNK SCANPOTEC APS
tel

+45 72 44 90 90

mobile

+45 25 21 32 30

address

Centervej 32A
4180 Soroe
Denmark

SVK BENNING Slovensko, s.r.o.
Richard Karaffa
tel

+421 244 459 942

mobile

+421 918 979 900

address

Sliačska 1
831 02 Bratislava
Slovak Republic

SVK BENNING Slovensko, s.r.o.
tel

+421 (0) 2 / 44 45 99 42

address

Sliačska 1
831 02 Bratislava
Slovak Republic

SUI BENNING Power Electronics GmbH
tel

+41 (0) 44 / 8 05 75 75

fax

+41 (0) 44 / 8 05 75 80

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

SUI BENNING Power Electronics GmbH
Jürg Badertscher
tel

+41 44 805 75 81

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

SUI BENNING Power Electronics GmbH
Pantelis Tasikas
tel

+41 44 805 75 74

fax

+41 44 805 75 80

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

TUR BENNING POWER ELEKTRONİK Ltd. Şti.
Kenan Bilgin
tel

+90 216 4457146

address

Uğurmumcu Mh. Akşemsettin cd.
No:56 Aslı Bahçe Sitesi
K:1 D:27 / 34882
Kartal / ISTANBUL
Turkey

UKR BENNING Power Electronics
tel

+38044 5014045

address

3 Sim'yi Sosninykh str.
03148 Kyiv
Ukraine

BGR Marpex Ltd.
tel

+359 2 964 0840

mobile

+359 888 408 854

fax

+359 2 964 0860

address

67,Cherni vrah Blvd
1407 Sofia
Bulgaria

KAZ Benning Power Electronics Central Asia LLP
Yerzhan Seidahkmetov
tel

+7 701 220 14 18

web

www.benning.kz

address

Al Farabi Avenue 17,
Nurly Tau, 4B, 1601
050051 Almaty
Kazakhstan

MKD
tel

+389 (2) 3052780102

address

Str. Partizanski odredi 155-1/78
1000 Skopje
North Macedonia