Traction Chargers

Cutting-edge technology for your charging station

Traction chargers - Cutting-edge technology for your charging station

You are here:

BELATRON High-Efficiency Charging Systems for Traction Batteries

For more than three decades, the name BELATRON has stood for advanced and future-oriented charging technology.

BELATRON high-efficiency charging systems operate with a controlled charging characteristic so that under and over charging is prevented independent of supply voltage variations.

These devices can be used to charge (E) PzS, (E) PzB, and AGM batteries. The internal memory of the charger stores all relevant charging characteristics.

The high frequency switching technology of the power unit allows installation of the BELATRON high-efficiency charging systems in compact enclosures.

Energy efficiency and CO2 emissions

Energy efficiency encompasses both ecological and economic considerations. Compared with conventional chargers, BELATRON high-efficiency charging systems reduce the amount of electrical energy consumed during the charging process by 25 %. This leads to reduced energy costs and lower CO2 emissions.

When charging a 48 V – 500 Ah traction battery using a BELATRON high-efficiency charging system over 240 days a year (single-shift operation), the annual saving on electrical energy is approx. 1900 kWh compared to a conventional charger. When generating the electrical energy required for charging the battery, 0.514 kg of CO2 are released per kilowatt hour. Every kilowatt hour saved reduces the CO2 emissions and therefore contributes to climate protection.

As a result of the energy saved, the CO2 emissions are reduced by 980 kg, which is comparable with the CO2 emissions of a diesel powered car (135 g CO2/km) traveling a distance of 7259 km. This distance would be equivalent to driving a passenger car to work 16 km away for 230 days a year (return journey 32 km).

Annual energy consumption and CO<sub>2</sub> emissions when charging a 48 V – 500 Ah traction battery (240 charges per year)
Annual energy consumption and CO2 emissions when charging a 48 V – 500 Ah traction battery (240 charges per year)

Energy Efficiency Calculator

Additional advantages of BELATRON high-efficiency charging systems
  1. Sinusoidal current consumption and excellent power factor:

    • Reduction of required power and therefore investment and installation costs
    • Reduction of peak current values, and no increase in the size of the reactive power compensator

  2. Low ripple charging current:

    • Minimizes temperature rise during charging
    • Increases battery life
    • Reduces service costs (watering intervals) for battery maintenance

  3. BELATRON systems comply with the EMC limits for domestic and industrial areas:

    • BELATRON high-efficiency charging systems can not only be used in industrial areas (as with many competitors´ units), but can also be used in business, domestic, and commercial area applications

  4. Charge state traffic lights:

    • The battery charge state can be easily determined from a distance thanks to large, colored indicator lights (charge state traffic lights) (from housing size WT60). In smaller units, LEDs provide continuous indication of the current charging state.
Optimized ventilation
Optimised ventilation concept
Optimised ventilation concept

Particular importance was placed on the new ventilation concept during the development of the new housing. Air enters and exits horizontally via the rear mounted heat sink (from a unit capacity of 2 kW).
Electronic components are generally encapsulated and located away from the main air flow in order to prevent damage by corrosion and/or contamination.

Further Information

Brochures