Lithium energy systems liflex NG

designed for industrial, mobile and stationary applications

liflex NG

Sustainably reduce operating costs, increase efficiency and equipment availability

BENNING is one of the innovation and technology leaders in the field of lithium technology in Europe. Our experience over the past few years has shown that, in addition to system availability, it is above all the service life and the amount of energy that can be extracted during a charge/discharge cycle that are decisive for the success of the investment.

liflex NG is the next development stage of our batteries. It is an innovative, future-proof system from 24 V to 96 V.

Economical and smart

Smart energy management combines increasing resource availability and efficiency with a sustainable reduction in operating costs.

Compared to lead-acid batteries the following results when using a liflex NG energy system:

  • Approx. 30 % reduction in energy costs
  • No maintenance costs
  • No handling costs
Longer lifetime with Q-Leveling

liflex NG energy systems are using the patented Q-Leveling process.

The usable capacity of the battery is significantly increased compared to control via a BMS. The natural aging process of battery systems can be significantly slowed with the help of the BMS NG.

2 Q-Leveling Badges side by side
Future-proof innovative system

liflex NG is a modular battery system from 24 V to 96 V. This battery complies with DIN EN 1175 and is therefore future-proof.

The system consists of a master module 24 V/140 Ah and depending on voltage and capacity, if necessary, several slave modules of 24 V/140 Ah. The master module is equipped with a cell module and the BMS with Q-Leveling.

Advantages

  • Long service life
  • Maximum availability of equipment
  • Highest economic efficiency
  • High flexibility over the entire service life
  • Independence from cell manufacturers and cell parameters
  • Environmentally friendly and sustainable (refurbishing or recycling)

liflex NG types

liflex NG types: Standard and Slim – Flexible installation

The liflex NG series is available in two module types: Standard and Slim. Both module types have the same capacity. The different housing sizes are achieved by different cell arrangement.

The systems/modules can be used both vertically and horizontally. This gives users added flexibility depending on the installation.

2 liflex NG batteries, positioned horizontally
liflex NG 24 V / 3.6 kWh (140 Ah)
Example of several liflex NG module configurations (standard or slim / lying or standing) next to each other in a diagram
Examples of liflex NG module configurations (standard or slim / lying or standing)

Operating cost advantages

liflex NG – The energy system with operating cost advantages

Montage of several images of the energy system lifelx

After only 2 years, the additional costs for the investment in a liflex NG energy system are compensated by the operating cost savings.

  • Approx. 30 % reduction in energy costs
  • No maintenance costs
  • No handling costs
  • Use of the battery over several vehicle lifetimes
  • No loading space costs

Charger

Charger BELATRON Li+ – IP54 and higher

  • Start/stop function via battery
  • 24 V to 96 V
  • Protection class IP54
  • Directly accessible off button
  • Two side fans
  • Optionally with heating

BELATRON Li+ series chargers 24 V to 120 V, various options available, e.g. protection type IP54 and higher, or various communications interfaces.

A BELATRON Li+ charger for wall mounting
BELATRON Li+ series charger, IP54
Diagram of a ventilation concept of the BELATRON charger. This is designed for use in dusty environmental conditions
The ventilation concept of the BELATRON charger is designed for use in dusty environmental conditions

liflex NG reduces the total cost of ownership (TCO) of your industrial truck operation

Cost comparison lead batteries 375 Ah vs. liflex NG energy system 280 Ah based on a 2-shift operation over a period of 5 years (investment and operating costs)

Q-Leveling

BMS NG – More efficient, safer and more economical with Q-Leveling

Comparision of the service life of a lithium ion battery (LFP 8S1P) equipped with a BMS or with a BMS plus Q-leveling
Here, we’ve compared the service life of a lithium ion battery (LFP 8S1P) equipped with a BMS or with a BMS plus Q-leveling. Our comparison illustrates the repercussion – on the whole system – of one cell’s loss of power. The loss is markedly reduced if the Q-leveling process is employed.

liflex NG energy systems are using the patented Q-Leveling process.

It not only measures and monitors the cell voltages, but also the capacity and fill level (SoC) of each individual cell.

Innovative algorithms compensate for the capacity differences between the individual cells by individually controlled charging currents already during the entire charging or discharging phases.

The usable capacity of the battery is significantly increased compared to control via a BMS. The natural aging process of battery systems can be significantly slowed with the help of the BMS NG.

This results in an increase in economic efficiency.

Seal Patented in gray and blue
Logo von Longevity ensured by Q-Leveling

liflex NG – up to 34 % lower energy costs and CO2 emissions

Graph and comparison of usable energy for lead and lithium batteries + 34% higher energy costs for lead batteries
Comparison of usable energy in lead and lithium batteries

Short distances – Charging on site, no central charging station necessary

There are positive effects on the economic use of your equipment, e. g.:

  • Lower investment costs, as cargo holds with complex aeration / deaeration as well as central water filling are no longer required
  • Higher resource utilization
  • No exchange batteries necessary
  • Fast and intermediate charging capable with Boost Charge, intermediate charging possible at any time (25 % charge in 20 min, 100 % charge in 2 h)
Diagram of the capacity curve of a liflex NG energy system in 2-shift operation with opportunity charging
Capacity curve of a liflex NG energy system in 2-shift operation with opportunity charging

liflex NG – Added value with method, now and in the future

  • Longer lifetime with Q-Leveling
  • Maintenance-free and reliable operation
  • High voltage capable
  • Lower operating costs
  • High efficiency, lower energy consumption, reduced energy costs
  • Emission-free
  • Low self-discharge
  • Recuperable
  • Recyclable
  • Stand-by mode
  • Environmentally friendly
Pie chart rental model. Simply rent and test and you will receive a comprehensive full service for everything to do with your energy package.
Flexibility and maximum availability at a fixed monthly price
  • Flexible response to order situations
  • Planning reliability
  • Calculable expenses
  • No capital commitment
  • Continuous availability
Blue background with lines, waves and patterns
One contact person for the entire project
BENNING – One contact person during the entire product lifecycle
  • You get the most economical solution and benefit in the long term from the direct link to BENNING as the manufacturer.
  • Quality made in Germany
Blue background with lines, waves and patterns
2 custom-made battery - liflex NG energy systems – also available with customized battery troughs
Also available with customized battery troughs

for different battery types

Blue background with lines, waves and patterns
Fitter with tablet and forklift

The profitability of your investment is determined by service life

A clear profile of requirements, combined with knowledge of what is technically possible at the time, will help vehicle operators to assess the major differences between lithium ion energy systems presently available.

Read more

Downloads

Brochures
Case Studies

Your contact persons

Where are you from? Select your country of origin from the list below, to quickly find your personal contact person.

BENNING Subsidiaries - Find your contact person by clicking on the corresponding flag.

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
tel

+49 2871 930

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Technical Support
tel

+49 2871 93555

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Peter Hoeptner
tel

+49 2871 93233

web

www.benning.de

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Deutschland

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Stefan Rasche
tel

+49 172 2859776

web

www.benning.de

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Nord
tel

+49 33708 31874

fax

+49 33708 31876

address

Ludwig-Erhard-Ring 18a
15827 Dahlewitz
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung West
tel

+49 2871 93513

fax

+49 2871 936513

address

Auf der Brede 60
42477 Radevormwald
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Ost
tel

+49 35245 728544

tel

+49 172 2859286

address

01665 Klipphausen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Süd
tel

+49 8332 936363

fax

+49 8332 936364

address

Bahnhofstr. 26
87749 Hawangen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Soest
tel

+49 2921 9819020

fax

+49 2871 936211

address

59494 Soest
Germany

USA BENNING Power Electronics, Inc.
Technical Support Hotline
tel

+1 800 910 3601

USA BENNING Power Electronics, Inc.
Services Support
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
BENNING US Sales
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
Customer Helpdesk
tel

+1 214 553 1444

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

ARG BENNING Conversion de Energía
Ricardo Hartbrecht
tel

+54 911 4937 4987

address

(B1653CIO) Villa Ballester,
BUENOS AIRES

AUT BENNING GmbH Elektrotechnik und Elektronik
Robert Maier [Vertriebsleitung Traktion]
tel

+43 (0) 664 60626230

tel

+43 2242 - 32416-0

web

www.benning.at

address

Eduard-Klinger-Str. 9
3423 St. Andrä-Wördern
Österreich

AUT BENNING GmbH Elektrotechnik und Elektronik
Vertrieb Österreich
tel

+43 (0) 2242-32416-0

web

www.benning.at

address

Eduard-Klinger-Str. 9
3423 St. Andrä-Wördern
Austria

BEL Celectric
tel

+32 (0) 3 / 8 77 54 60

address

Schelle
Belgium

BLR OOO «BENNING Elektrotechnik und Elektronik»
tel

+375 162 512 512

address

Masherova Ave., 6A, 1003
224030 Brest
Belarus

BRA BENNING Conversión de Energía S. A.
Paulo C. Anacleto [Manager – Brazil]
tel

+55 19 98270 0303

address

Campinas BRAZIL

CRO BENNING Zagreb d.o.o.
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CRO BENNING Zagreb d.o.o.
Kresimir Kauric
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CZE BENNING CR, s.r.o.
tel

+420 / 3 26 72 10 03

address

Zahradní ul. 894
293 06 Kosmonosy
Czech Republic

CHN BENNING Power Electronics Beijing Co., Ltd.
tel

+86 (0) 10 / 61 56 85 88

fax

+86 (0) 10 / 61 50 62 00

address

No. 6 Guangyuan Dongjie
Tongzhou Industrial
Development Zone
101113 Beijing
P.R. China

FRA BENNING conversion d’énergie
tel

+33 (0) / 2 32 25 23 94

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

FRA BENNING conversion d’énergie
Soufiane Aït Amara [Sales Director France & Africa]
tel

+33 (0) 2 77 68 60 18

mobile

+33 (0) 6 42 71 36 38

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27400 Louviers
France

FRA BENNING conversion d’énergie
Aziz Saber [Business Engineer Africa]
tel

+33 2 77 68 60 14

mobile

+33 6 88 35 23 46

GBR BENNING Power Electronics UK Ltd
Info
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Service
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Sales
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GBR BENNING Power Electronics UK Ltd
Service
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
United Kingdom

GRE BENNING Hellas
BENNING Hellas
tel

+30 210 5741137

fax

+30 210 5782554

web

www.benning.gr

address

Chanion 1, Lykovrisi
141 23 Athens
Greece

HUN BENNING Kft. Power Electronics
tel

+36 (0) 33 / 50 76 00

address

Rákóczi út 145
2541 Lábatlan
Hungary

IRL Laor Energy (1993) L.T.D.
tel

+972 9 8912232

web

http://laor-energy.com

address

POB 5026
North Industrial Zone
60920 KADIMA

NED Celectric
tel

+31 (0) 3 41 / 46 77 01

address

Harderwijk
Netherlands

POL BENNING Power Electronics Sp. z o.o.
tel

+48 (0) 22 / 7 57 84 53

address

Korczunkowa 30
05-503 Glosków
Poland

POL BENNING Power Electronics Sp. z o.o.
Malgorzata Grodzka
tel

+48-22 757 84 53 wew. 113

tel

+48-661 660 130

web

www.benning.biz

address

Korczunkowa 30
05-503 Glosków
Poland

SRB BENNING Power Electronics doo
tel

+381 11 3 16 14 29

address

Dunavskih Virova 5
11186 Beograd
Serbia

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

ESP BENNING Conversión de Energía S.A.
tel

+34 91 / 6 04 81 10

address

C/Pico de Santa Catalina 2
Pol. Ind. Los Linares
28970 Humanes, Madrid
Spain

SWE BENNING Sweden AB
Order och leveransinformation
tel

+46 (8) 623 95 16

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
Teknisk support, reservdelar
tel

+46 (8) 623 95 89

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
tel

+46 (8) 6239500

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Sweden

SWE BENNING Sweden AB
Försäljning
tel

+46 (8) 623 95 79

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SVK BENNING Slovensko, s.r.o.
Richard Karaffa
tel

+421 244 459 942

mobile

+421 918 979 900

address

Šenkvická 3610/14W
90201 PEZINOK
Slowakei

SVK BENNING Slovensko, s.r.o.
tel

+421 (0) 2 / 44 45 99 42

address

Šenkvická 3610/14W
90201 PEZINOK
Slowakei

TUR BENNING GmbH Turkey Liaison Office
Kenan Bilgin
tel

+90 216 4457146

address

19 Mayıs Mah. Kürkçü Sokak No: 16 / A
34736 Kozyatağı
Kadıköy / Istanbul
Turkey

UKR BENNING Power Electronics
tel

+38044 5014045

address

3 Sim'yi Sosninykh str.
03148 Kyiv
Ukraine

BGR Marpex Ltd.
tel

+359 2 964 0840

mobile

+359 888 408 854

fax

+359 2 964 0860

address

67,Cherni vrah Blvd
1407 Sofia
Bulgaria

KAZ Benning Power Electronics Central Asia LLP
Yerzhan Seidahkmetov
tel

+7 701 220 14 18

web

www.benning.kz

address

Al Farabi Avenue 17,
Nurly Tau, 4B, 1601
050051 Almaty
Kazakhstan