High-End-Multimeter BENNING MM 7-2

Outstanding quality, safety and price/performance ratio

1. REL Δ relative measurement for offset compensation
2. VoltSense (Voltsensor) non-contact and single-pole phase testing with 2 sensitivity levels
3. AUTO-RANGE automatic measuring range selection for increased ease of use
4. HOLD/ A-HOLD manual and automatic storage of the display value for convenient reading
5. PEAK quick memory of MAX/ MIN peak value (250 µs) for current and voltage (APO disabled)
6. Resistance/ continuity (Antenna /Lamp) max. resolution 0,01 Ω up to 60 MΩ / visual and acoustic signal with fast response time (< 100 µs)
7. Logic level (Hz/ %) frequency and duty cycle measurement of logic signals
8. mV DC, AC, AC+DC 0.01 V resolution (600 mV measuring range)
9. V DC, AC+DC 0.03 % basic accuracy VDC (max.)
10. V AC/ HFR connectable low-pass filter for measurements on frequency converters and for measuring noisy signals
11. AutoV automatic AC+DC switch-over and measuring range selection
12. LoZ low input impedance (> 2 kΩ) to suppress reactive voltages
13. Jack control (optical/ acoustic) warning in case of incorrect measuring range selection to protect the fuses
14. Robust and ergonomic housing with integrated protective rubber holster, rear stand and measuring lead holder
15. APO (Auto Power OFF) automatic switch-off (“APO”) after 30 min. for extended battery lifetime (can be disabled)
16. Large LC display with 60 000 digit resolution and illumination, rate: 5/ s
17. RANGE automatic and manual measuring range selection
18. Analogue bar graph for the detection of measuring trends, rate: 50/ s
19. Function /  function selection and display illumination (APO, 16 min.)
20. Hz measurement of noisy mains frequencies
21. MIN/ MAX memory of MIN/ MAX/ AVG measurement value (APO disabled)
22. 4 mA - 20 mA DC current loop measurement for process signals
23. mA/ A DC, AC, AC+DC for precise current measurement (TRUE RMS)
24. µA DC, AC, AC+DC measurement of low currents, e. g. ionisation current of a gas heating system (HVAC technology)
25. Temperatur via K type sensor in °C and °F
26. Capacity/ diode measurement of capacitors up to 10 mF, visual and acoustic diode testing
27. Safety EN 61010-1, EN 61010-2-033
28. CAT IV 600 V/ CAT III 1000 V transient protection up to 8 kV (1.2/50 µs)
29. TRUE RMS AC, AC+DC TRUE RMS measuring method for non-sinusoidal signals
30. 1 kV HBC fuses with high breaking capacity 20 kA@1000 V, F 11 A / 30 kA@1000 V, F 0,4 A

Silicone measuring leads with 2 mm and 4 mm measuring probe highly flexible measuring lead with gold-plated measuring probe (reducing oxidation) for reliable contacting

BENNING MM 7-2 with

• integrated protective rubber holster for increased grip and impact resistance, rear stand and measuring lead holder
• carrying case
• high-quality silicone measuring leads with gold-plated 2 mm and 4 mm measuring probe (screw-on type)
• wire temperature sensor
• batteries (3 x 1.5 V micro AAA/ IEC LR03)

Technical changes, model or color modifications, mistakes and delivery facilities without notice! No responsibility for literal mistakes.