Lithium energy systems liflex NG

designed for industrial, mobile and stationary applications

liflex NG

Sustainably reduce operating costs, increase efficiency and equipment availability

BENNING is one of the innovation and technology leaders in the field of lithium technology in Europe. Our experience over the past few years has shown that, in addition to system availability, it is above all the service life and the amount of energy that can be extracted during a charge/discharge cycle that are decisive for the success of the investment.

liflex NG is the next development stage of our batteries. It is an innovative, future-proof system from 24 V to 96 V.

Economical and smart

Smart energy management combines increasing resource availability and efficiency with a sustainable reduction in operating costs.

Compared to lead-acid batteries the following results when using a liflex NG energy system:

  • Approx. 30 % reduction in energy costs
  • No maintenance costs
  • No handling costs
Longer lifetime with Q-Leveling

liflex NG energy systems are using the patented Q-Leveling process.

The usable capacity of the battery is significantly increased compared to control via a BMS. The natural aging process of battery systems can be significantly slowed with the help of the BMS NG.

2 Q-Leveling Badges side by side
Future-proof innovative system

liflex NG is a modular battery system from 24 V to 96 V. This battery complies with DIN EN 1175 and is therefore future-proof.

The system consists of a master module 24 V/140 Ah and depending on voltage and capacity, if necessary, several slave modules of 24 V/140 Ah. The master module is equipped with a cell module and the BMS with Q-Leveling.

Advantages

  • Long service life
  • Maximum availability of equipment
  • Highest economic efficiency
  • High flexibility over the entire service life
  • Independence from cell manufacturers and cell parameters
  • Environmentally friendly and sustainable (refurbishing or recycling)

liflex NG types

liflex NG types: Standard and Slim – Flexible installation

The liflex NG series is available in two module types: Standard and Slim. Both module types have the same capacity. The different housing sizes are achieved by different cell arrangement.

The systems/modules can be used both vertically and horizontally. This gives users added flexibility depending on the installation.

2 liflex NG batteries, positioned horizontally
liflex NG 24 V / 3.6 kWh (140 Ah)
Example of several liflex NG module configurations (standard or slim / lying or standing) next to each other in a diagram
Examples of liflex NG module configurations (standard or slim / lying or standing)

Operating cost advantages

liflex NG – The energy system with operating cost advantages

Montage of several images of the energy system lifelx

After only 2 years, the additional costs for the investment in a liflex NG energy system are compensated by the operating cost savings.

  • Approx. 30 % reduction in energy costs
  • No maintenance costs
  • No handling costs
  • Use of the battery over several vehicle lifetimes
  • No loading space costs

Charger

Charger BELATRON Li+ – IP54 and higher

  • Start/stop function via battery
  • 24 V to 96 V
  • Protection class IP54
  • Directly accessible off button
  • Two side fans
  • Optionally with heating

BELATRON Li+ series chargers 24 V to 120 V, various options available, e.g. protection type IP54 and higher, or various communications interfaces.

A BELATRON Li+ charger for wall mounting
BELATRON Li+ series charger, IP54
Diagram of a ventilation concept of the BELATRON charger. This is designed for use in dusty environmental conditions
The ventilation concept of the BELATRON charger is designed for use in dusty environmental conditions

liflex NG reduces the total cost of ownership (TCO) of your industrial truck operation

Cost comparison lead batteries 375 Ah vs. liflex NG energy system 280 Ah based on a 2-shift operation over a period of 5 years (investment and operating costs)

Q-Leveling

BMS NG – More efficient, safer and more economical with Q-Leveling

Comparision of the service life of a lithium ion battery (LFP 8S1P) equipped with a BMS or with a BMS plus Q-leveling
Here, we’ve compared the service life of a lithium ion battery (LFP 8S1P) equipped with a BMS or with a BMS plus Q-leveling. Our comparison illustrates the repercussion – on the whole system – of one cell’s loss of power. The loss is markedly reduced if the Q-leveling process is employed.

liflex NG energy systems are using the patented Q-Leveling process.

It not only measures and monitors the cell voltages, but also the capacity and fill level (SoC) of each individual cell.

Innovative algorithms compensate for the capacity differences between the individual cells by individually controlled charging currents already during the entire charging or discharging phases.

The usable capacity of the battery is significantly increased compared to control via a BMS. The natural aging process of battery systems can be significantly slowed with the help of the BMS NG.

This results in an increase in economic efficiency.

Seal Patented in gray and blue
Logo von Longevity ensured by Q-Leveling

liflex NG – up to 34 % lower energy costs and CO2 emissions

Graph and comparison of usable energy for lead and lithium batteries + 34% higher energy costs for lead batteries
Comparison of usable energy in lead and lithium batteries

Short distances – Charging on site, no central charging station necessary

There are positive effects on the economic use of your equipment, e. g.:

  • Lower investment costs, as cargo holds with complex aeration / deaeration as well as central water filling are no longer required
  • Higher resource utilization
  • No exchange batteries necessary
  • Fast and intermediate charging capable with Boost Charge, intermediate charging possible at any time (25 % charge in 20 min, 100 % charge in 2 h)
Diagram of the capacity curve of a liflex NG energy system in 2-shift operation with opportunity charging
Capacity curve of a liflex NG energy system in 2-shift operation with opportunity charging

liflex NG – Added value with method, now and in the future

  • Longer lifetime with Q-Leveling
  • Maintenance-free and reliable operation
  • High voltage capable
  • Lower operating costs
  • High efficiency, lower energy consumption, reduced energy costs
  • Emission-free
  • Low self-discharge
  • Recuperable
  • Recyclable
  • Stand-by mode
  • Environmentally friendly
Pie chart rental model. Simply rent and test and you will receive a comprehensive full service for everything to do with your energy package.
Flexibility and maximum availability at a fixed monthly price
  • Flexible response to order situations
  • Planning reliability
  • Calculable expenses
  • No capital commitment
  • Continuous availability
One contact person for the entire project
BENNING – One contact person during the entire product lifecycle
  • You get the most economical solution and benefit in the long term from the direct link to BENNING as the manufacturer.
  • Quality made in Germany
2 custom-made battery - liflex NG energy systems – also available with customized battery troughs
Also available with customized battery troughs

for different battery types

Fitter with tablet and forklift

The profitability of your investment is determined by service life

A clear profile of requirements, combined with knowledge of what is technically possible at the time, will help vehicle operators to assess the major differences between lithium ion energy systems presently available.

Read more

Downloads

Brochures
Case Studies

Your contact persons

Where are you from? Select your country of origin from the list below, to quickly find your personal contact person.

BENNING Subsidiaries - Find your contact person by clicking on the corresponding flag.

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Technical Support
tel

+49 2871 93555

addressfactory I Münsterstr. 135-137 factory II Robert-Bosch-Str. 20 46397 Bocholt Germany
NED Celectric
tel

+31 (0) 3 41 / 46 77 01

addressHarderwijk Netherlands