Optional Accessories for BENNING testing and measuring instruments
- Premium case DUSPOL® - practical HardCase with handle, counter-rotating zipper (outside), padded mesh pocket with zipper, flexible fastening loops with Velcro. High protection despite low weight. Suitable for DUSPOL® voltage testers and PROFIPOL®+. Dimensions approx.. 330 x 105 x 65 mm (010914)
- practical stand-by cases with belt loop (except for size M), made of hard-wearing nylon fabric
- DUSPOL® Case (330 x 100 x 60 mm) (010911)
- Size S Case (220 x 110 x 50 mm) (010912)
- Size M Case (240 x 180 x 70 mm) (010913)
- robust hard case, made of ABS material with foam insert, separate shelf and lid compartment for accessories and small parts. Safe transport protection for high-quality testing and measuring instruments. Dust and waterproof. Dimensions width 375 mm, depth 190 mm, height 250 mm (10198412)
- Magnetic holder
- BENNING TA 4, magnetic holder for multimeter and BENNING IT 101, 3 pieces, consisting of magnetic holder, adapter and belt, for attachment of BENNING multimeters to switching cabinets, machine and system parts (044120)
- Temperature probe, type K for BENNING MM 1-3, BENNING MM 5-2, BENNING MM 7-1, BENNING MM 7-2, BENNING MM 10-1, BENNING MM 10-PV, BENNING MM 12 and BENNING CM 10-PV. Insertion probe (V4A steel tube) for flexible substances, liquids, gases and air, measuring range - 196 °C to + 800 °C. (044121)
- Sets of safety measuring leads
- BENNING TA 1, Ø 4 mm crocodile clips, two pieces, red/ black, professional equipment, CAT III 1000 V (044124)
- BENNING TA 2, Ø 4 mm measuring leads, six pieces, red/ black, professional equipment, consisting of measuring leads (silicone) (CAT III 1000 V), test probes (4 mm measuring tip) (CAT II 1000 V), crocodile clips (CAT III 1000 V) (044125)
- BENNING TA 3, Ø 4 mm measuring leads, eight pieces, red/ black, professional equipment, CAT III 1000 V, consisting of measuring leads (silicone), test probes (slender measuring tip), claw clamps, crocodile clips (044126)
- Ø 4 mm silicone measuring leads with 2 mm and 4 mm measuring probe, with gold-plated Ø 2 mm and Ø 4 mm (screw-on type) Messspitze (l = 18 mm), CAT IV 1000 V/CAT III 1000 V (with protective caps), CAT II 1000 V (without protective caps) (10231315)
- Ø 4 mm measuring leads with 4 mm measuring tip, Ø 4 mm measuring leads 2 pieces, red/ black, L = 1.40 m, with 4 mm measuring tip, CAT IV 600 V/ CAT III 1000 V (with protective caps), CAT II 1000 V (without protective caps) (044145)
- Ø 4 mm measuring leads with 2 mm measuring tip, Ø 4 mm measuring leads 2 pieces, red/ black, L = 1.40 m, with 2 mm measuring tip, CAT IV 600 V/ CAT III 1000 V (with protective caps), CAT II 1000 V (without protective caps) (044146)
- Set of measuring leads for BENNING MM 4, set of Ø 4 mm measuring leads, 3 pieces, consisting of measuring leads with 2 mm measuring tip, 2 measuring probes with 2 mm measuring tip (044119)
- BNC adapter for BENNING MM 7-2, for connecting two 4 mm safety measuring leads to BNC connectors, for measuring the duty cycle of the CP signal of wall boxes via multimeters, for use with oscilloscopes, function generators, frequency counters and wall box adapters, 2 x 4 mm safety measuring jack to BNC (male), no resistance / transformation ratio (10231627)
- Test probe cap for Voltage Tester DUSPOL® - BENNING for reducing the test probe contact to a length of 4 mm (p ackaging unit = 10 test probe caps)
- Optional Accessories for BENNING CM 1-4
- Convenient belt-holster with velcro fasteners for attachment to the belt. Made of hard-wearing nylon fabric. Suitable for digital current clamp meter BENNING CM 1-4. Dimensions 190 x 80 x 40 mm (10217845)
- Set of measuring leads consting of Ø 4 mm measuring leads, seven pieces, red/ black, length = 1.40 m, with 2 mm measuring tip. CAT IV 600 V / CAT III 1000 V (with push-on caps), CAT II 1000 V (without push-on caps), CAT II 1000 V (with 4 mm Ø contact tip extensions). Contact tip protection to protect against injuries, attached to the black safety measuring leads. Incl. one set of push-on caps (CAT III/ IV), red/ black, to reduce the length of the uninsulated part of the contact tips and one set 4 mm Ø contact tip extensions (CAT II). (10217842)
- Contact tip protection, five pieces, to protect against injuries. Incl. one set of push-on caps (CAT III/ IV), red/ black, to reduce the length of the uninsulated part of the contact tips and one set 4 mm Ø contact tip extensions (CAT II). (10217843)
- Optional Accessories exclusively for BENNING CM 10-PV and BENNING MM 10-PV
- BENNING TA PV (4 mm) measuring adapter with 4 mm measuring tips is tob e used for AC/DC voltage measurements. Safe voltage measurement up to1500 V AC/ 2000 V DC, e.g. photovoltaic systems. Measuring category: with push-on caps: 1000 V CAT III, 600 V CAT IV, without push-on caps: 1000 V AC CAT II/ 1500 V DC CAT II. Length: 1,4 m. Incl. push-on caps CAT III/ IV (10217846)
- BENNING TA PV connector Measuring adapter with PV connector is tob e used for DC voltage measurements. Safe voltage measurement up 2000 V DC. For direct contact to PV generators with PV connectors. Length: 1,4 m. (10231740)
Further Information
Testing, Measuring and Safety Instruments (2025) (german) (7.4 MiB) (New)
Testing, Measuring and Safety Instruments (2025) (english) (3.2 MiB) (New)
Testing, Measuring and Safety Instruments (2024/2025) (dutch) (6.0 MiB)
Testing, Measuring and Safety Instruments (2024/2025) (french) (3.2 MiB)
Testing, Measuring and Safety Instruments (2019) (czech) (4.7 MiB)
Testing, Measuring and Safety Instruments (2024/2025) (greek) (3.3 MiB)
Technical Support
(After Sales Service)
+49 2871 93 555
helpdesk@benning.de
Returns Management, Calibration, Repairs
+49 2871 93 554
returns@benning.de
Product Advice
+49 2871 93 111
duspol@benning.de
Training Management
+49 2871 93 557
trainingcenter@benning.de
The delivery takes place only by wholesaler.
Our agencies (* with warehouse) for the customer topologies Electrical Wholesalers (EGH) and Hardware Wholesalers (PVH):
Herzog Industrievertretung GmbH
Fritz-Karl-Henkel-Str. 12-16
D-67454 Haßloch
ELKA Krischke Elektrotechnik
Wettersteinstr. 12
D-82024 Taufkirchen
SKE Steffen Klewe
Elektrotechnische Handelsvertretung
Teltower Damm 214
D-14167 Berlin
Bremen, Niedersachsen (PVH)
BENNING GmbH & Co. KG
Münsterstr. 135 - 137
D-46397 Bocholt
Lower Saxony (Center/East) (EGH)
TBB-Technischer Bedarf Böttcher GmbH
Gänseweide 7
D-21379 Lüdersburg
Ronny Münch
Jägerstr. 3
D-35099 Burgwald
SKE Steffen Klewe
Elektrotechnische Handelsvertretung
Teltower Damm 214
D-14167 Berlin
BENNING GmbH & Co. KG
Münsterstr. 135 - 137
D-46397 Bocholt
Herzog Industrievertretung GmbH
Fritz-Karl-Henkel-Str. 12-16
D-67454 Haßloch
Udo Wendelmuth
Erfurter Str. 61
D-99195 Schwansee
SKE Steffen Klewe
Elektrotechnische Handelsvertretung
Teltower Damm 214
D-14167 Berlin
Thuringia (EGH/PVH)
Udo Wendelmuth
Erfurter Str. 61
D-99195 Schwansee
(* EGH = for Electrical Wholesaler, PVH = for Hardware Wholesalers)
BENNING GmbH Elektrotechnik und Elektronik
+43/ (0) 2242-32416-0
Eduard-Klinger-Str. 9
3423 St. Andrä-Wördern
Drugmand & Meert / EMAS / Gecom
+32 (0) 22 51 60 60
+32 (0) 22 52 22 66
De bavaylei 110
1800 VILVOORDE
P.J. Timmerman & Fils N.V.
+32 (0) 23 77 71 66
+32 (0) 23 77 94 58
Koning-Albertstraat 3 - 7
1600 SINT-PIETERS LEEUW
Contragent 35
+3 59 42 60 01 45
+3 59 42 60 01 29
Industrialna Str.
6000 STARA ZAGORA
BENNING Power Electronics (Beijing) Co., Ltd.
+86 (0) 10 61 56 85 88
+86 (0) 10 61 50 62 00
Tongzhou Industrial Development Zone
No.1-B BeiEr Street
101113 BEIJING
EST Elektro - System -Technik s.r.o.
+42 02 66 09 07 11
+42 02 66 09 07 17
Pod pekarnami 338/12
190 00 PRAHA 9 VYSOCANY
AGéCOM Diffusion
+33 (0) 3 88 19 70 10
+33 (0) 3 88 19 02 73
6, rue de Londres
CS 60090 Mommenheim
67173 BRUMATH CEDEX
BENNING Conversion d'énergie
+33 (0) 2 32 25 23 94
+33 (0) 2 32 25 08 64
43, avenue Winston Churchill
27404 LOUVIERS
V.KAFKAS S.A.
+30 / 21 63 00 30 00
+30 / 21 63 00 31 00
1 klm Markopoulou Aven.
19002 Paiania Attiki
www.kafkas.gr
BENNING Kft.
+36 (0) 33/ 50 76 00
+36 (0) 33/ 50 76 01
Ringló út 99
1221 BUDAPEST
Amwittools BV
+31 (0) 1 72 53 84 33
+31 (0) 1 72 53 06 55
Harsweg 22
2461 EZ Ter Aar
ITECE Holland B.V.
+31 (0) 1 72 53 84 33
+31 (0) 1 72 53 06 55
Harsweg 22
2461 EZ Ter Aar
EUROTEC LIMITED
+64/ 9/ 5 79 19 90
+64/ 9/ 5 25 33 34
750, Great South Road
1061 PENROSE, AUCKLAND
"LL" Spolka z ograniczona
+48/ 7 13 98 08 00
+48/ 7 13 98 08 02
odpowiedzialnoscia sp. k.
dawniej Lange Lukaszuk Sp. j
ul. Wrocławska 43, Byków
55-095 MIRKOW
BENNING Power Electronics ROM SCS
+40 (0) 2 55 20 60 96
+40 (0) 2 55 51 66 08
Str. Lunca Grofului, Nr. 4
327055 BUCHIN
OOO BENNING Power Electronics Ltd.
+7 4 95/ 9 67 68 50
+7 4 95/ 9 67 68 51
ul. Planetnaya, 11
125167 MOSCOW
Anderba d.o.o.
+381/ 11 76 78 09
+381/ 3 29 21 77
Ljube Stojanovica 36/III
11000 BEOGRAD
BENNING Slovensko s.r.o.
+421 (0) 2 44 45 99 42
+421 (0) 2 44 45 50 05
Kukuricná 17
83103 BRATISLAVA
BENNING c.d.e. SA
+34 91 6 04 81 10
+34 91 6 04 84 02
C/Pico de Santa Catalina 2
Pol. Ind. Los Linares
28970 HUMANES
Hellermann Tyton (Pty) Ltd
+27 11 8 79 66 20
+27 11 8 79 66 03
Private BAG X 158
2128 RIVORIA
OEM Automatic AB
+46/ 75/ 2 42 41 00
+46/ 75/ 2 42 41 19
Fredriksbergsgatan 2
573 92 TRANAS
BENNING Power Electronics GmbH
+41 (0) 44 / 8 05 75 75
+41 (0) 44 / 8 05 75 80
Industriestrasse 6
8305 Dietlikon
RECOM ELECTRONICS AG
+41 (0) 44 / 7 87 10 00
+41 (0) 44 / 7 87 10 05
Samstagernstrasse 45
8832 Wollerau
BENNING Power Electronics, Inc.
