SLIMLINE NG – telecommunications power supplies

Smart, flexible, modular • highly efficient and reliable • cost-effective

SLIMLINE NG – telecommunications power supplies

Reliable cost-effective solutions – Made in Germany

Rectifier inverter SLIMLINE NG combination - One System
Combination of a rectifier (72 kW / 90 kW) and an inverter (7.5 kVA / 7.5 kVA) in one system

It has become normal within our modern society to use a wide variety of electronic media for instantaneous contactability, communication, process control and transactions.

In order to always be in touch, permanently available network access is required whose backbone is formed by the nationwide roll-out of high-speed wireless data networks such as LTE and, in future, 5G. The requisite telecommunications technology requires there to be a reliable power supply which is operational at all times.

BENNING has delivered battery-powered AC and DC power supplies to many mobile phone and landline operators around the world for decades and has made particular investments in the development of high-efficiency power supplies for energy-saving, reliable operation. Nowadays, BENNING ranks as one of the leading suppliers of high-efficiency power supplies for the secure operation of information, telecommunications and industrial technology systems.

The most cost-effective solution for every requirement

The new SLIMLINE series covers the entire array of mobile radio applications, from the mobile switching center (MSC for short) to the base station controller (BSC) to individual base transceiver stations (BTS). Consequently, the power supply systems safeguard the entire transmission technology (LTE, 5G, VOIP, TV, servers, etc.) against power failures.

Carrier SLIMLINE 2000 NG modules - rectifier
The 19" 1H carrier can accommodate either five 48 V and 2000 W rectifier modules combined with a controller or six rectifier modules
Carrier SLIMLINE 3000 NG modules - rectifier
The 19" 1H carrier can accommodate either four 48 V and 3 000 W rectifier modules combined with a controller or five rectifier modules

SLIMLINE 2000 NG

System SLIMLINE 2000 NG 4kW module - rectifier
SLIMLINE system 48 V / 4 kW with a controller module, as well as battery and consumer distribution

Low power ratings of up to 4000 W

The smallest rated low-power telecommunications power supply system, SLIMLINE PSU 4000, has a maximum of two rectifier modules 48 V / 2000 W, a controller, as well as the battery and consumer distribution integrated into a 19" 1H SLIMLINE carrier.

System SLIMLINE 2000 NG 22kW module - rectifier
SLIMLINE system 48 V / 22 kW with a controller module

Medium power ratings of up to 34 kW
System power ratings of 10 kW (with a controller module) or 12 kW in only one module height can be achieved with a rack which is fully configured with rectifiers for the medium output range, which includes mobile radio stations for example.

The power rating can be increased to up to 22 kW by connecting a second SLIMLINE carrier in parallel.
Battery and consumer distribution units of different outputs are available for all power ranges, guaranteeing a compact, space-saving system. The distribution units are also structured in 19" plug-in units.

System SLIMLINE 2000 NG 10kW module - rectifier
SLIMLINE system 48 V / 10 kW with a SLIMLINE controller, as well as battery and consumer distribution. Power ratings of 2 – 34 kW can be achieved by scaling the rectifiers and adapting the distribution.

High power ratings of up to 400 kW

Larger power ratings, such as those required in nodes and distribution stations, can be achieved by connecting multiple SLIMLINE carriers in parallel. This enables power ratings of up to 400 kW to be achieved. The systems are integrated into 19" cabinet systems which can also house batteries and distribution units.

The SLIMLINE controller is available for more extensive control and monitoring functions.

SLIMLINE – cost-effective operation and maximum availability

Maximum availability
  • maximum availability
    • very high reliability
    • low mean time to repair (MTTR)
    • reliable hot swap modularity
    • decentralised parallel architecture
    • remote monitoring via TCP/IP
  • superior supply quality
    • sinusoidal input current, no reactive-power absorption (power factor ≥ 0.99)
Minimised operating costs
  • low operating costs
    • high efficiency > 97% even at partial load
    • extremely high power density and, thus, low space requirements at the installation site
    • sustainable investment reliability through pay-as-you-grow scalability up to 400 kW
    • automatic synchronisation of the rectifier modules during replacement and retrofitting
    • low expenditure for installation, commissioning and expansion
Flexible component concept

Modular component concept

The modular concept significantly lowers the cost and time expenditure in the installation and maintenance of the new SLIMLINE telecommunications power supplies at wireless sites which are being newly built or converted.

Flexible scalability up to 400 kW

The SLIMLINE system is simply scalable and can grow in line with customer requirements – from 2 to 400 kW. Due to the high degree of modularisation, it is possible to plan, configure and deliver customised systems at very short notice. It is possible to combine rectifiers and inverters in one system. Both system components are monitored and configured by the MCU 3000 on a common interface.

Hot plug

All modules can be replaced during ongoing operation (hot plug). The SLIMLINE carrier with the appropriate quantity of rectifier modules and the assigned battery and consumer distribution create a complete, modular SLIMLINE power supply system.

Maximum operational reliability, minimum operating costs

SLIMLINE SE NG generations power density - Diagram
In this series, the power density is more than 33% improved on the previous model

The newly developed SLIMLINE power supply solutions are precisely tailored to the requirements of the telecommunications network operator. They include:

  • optimum operational reliability
  • maximum energy efficiency
  • optimum user space
  • flexibility (pay as you grow)
  • modularity

They not only contribute significantly to the low total cost of ownership (TCO), they are also the basis for a clear reduction in installation and assembly times, as well as for simpler and more efficient maintenance possibilities in later operation.

Only one type of rectifier is required for systems within a power range of 2 kW to 400 kW. This simplifies stock management and logistics for the benefit of the owner as it is only required to keep one type of module in stock for all systems.

Optimum energy efficiency in the minimum user space

Individual rectifier modules with an output of 2000 W are available for creating complete power supply systems. The 19" 1H carrier can accommodate either five 48 V / 2000 W rectifier modules combined with a monitoring and control unit (SLIMLINE controller) or six rectifier modules. This gives a power rating of 10 kW or 12 kW per rack.

SLIMLINE SE NG efficiency output power - Diagram
Efficiency in relation to the output power

In this series of high-efficiency rectifiers, the power loss which occurs in the transformation of energy from alternating current to direct current has been reduced by up to 30% compared to the previous model. At the same time, the overall physical footprint of the rectifiers has been reduced by more than 33%.

A particularly impressive fact is that the SLIMLINE series works at efficiency in excess of 97% across a load range of between 50% and 90%. This creates substantial savings for telecommunications service providers which operate a number of systems in the field. Optionally, active power management can be enabled which determines the load required and automatically connects or disconnects the rectifier modules accordingly.

SLIMLINE controller – remote monitoring and reliability in a very compact space

The SLIMLINE controller is available for extensive control and monitoring functions. This is generally inserted into the SLIMLINE carrier as a module in the case of low power ratings. The 19" 1H carrier can accommodate either five 48 V / 2000 W rectifier modules combined with a controller module or six rectifier modules. In the case of power supplies with a greater power rating, the monitoring and control unit can be integrated into the cabinet door of the power supply system.

The controller monitors the entire power supply system and controls the power management for example. The system is structured to ensure that the power supply remains operational in the event of controller failure. The rectifiers continue to supply the system and the batteries, which is why the power remains at 100%. Therefore, failure is not critical to the process, and there is no need for controller redundancy. This lessens the space required and reduces investment and operating costs. Needless to say, a message appears in the event of a controller failure so that prompt steps can be taken to have the controller module replaced by a service technician at short notice.

Controller module SLIMLINE display - rectifier industry
The front of the new SLIMLINE controller module has a 1.8" display, a USB 2.0 port (to accommodate a WLAN stick, for instance), as well as an Ethernet port
Controller module SLIMLINE touch display - rectifier industry
In the case of systems with a larger power rating, the system controller (MCU 3000) can be inserted into the cabinet door of the power supply system. This design has a 10.4" touch display

It is easy to operate by computer, tablet or smartphone

In the case of the SLIMLINE controller modules which are inserted in the carrier, a large number of components are integrated on just a fifth of the 19" width, so the module offers interfaces for e.g. SNMP, modbus, modem, ethernet and USB for connecting a WLAN adapter.

The system can be configured via the integrated colour display on the front. If there is a mobile device or computer available, the configuration can take place conveniently via a network connection and Internet browser. There is no further software required. By consistently matching operation to the requirements of the user delivers all the most beneficial measurements and settings with clarity, precision and simplicity.

The high contrast, bright display of the SLIMLINE controller also functions as a visual alert. If a fault occurs, it is fully illuminated in red and is clearly visible from a distance.

Controller module SLIMLINE connectivity - rectifier industry
The SLIMLINE controller module accommodates five methods of connectivity on only one sixth of its 19" width; they existed individually in the previous model and required additional space.

SLIMLINE 3000 NG

System SLIMLINE 3000 NG 12kW module - rectifier
SLIMLINE system 48 V / 12 kW with a controller module

Medium power ratings of up to 27 kW

System power ratings of 12 kW (with a controller module) or 15 kW in only one module height can be achieved with a carrier which is fully configured with rectifiers for the medium output range, which includes mobile radio stations for example.

System SLIMLINE 3000 NG 27kW module - rectifier
SLIMLINE system 48 V / 27 kW with a controller module

The power rating can be increased to up to 27 kW by connecting a second SLIMLINE carrier in parallel. Battery and consumer distribution units of different outputs are available for all power ranges, guaranteeing a compact, space-saving system. The distribution units are also structured in 19" plug-in units.

SLIMLINE 3000 NG 12kW module distribution - rectifier
SLIMLINE system 48 V / 12 kW with a controller, as well as battery and consumer distribution. Power ratings of 3 – 27 kW can be achieved by scaling the rectifiers and adapting the distribution.

High power ratings of up to 300 kW

Larger power ratings, such as those required in nodes and distribution stations, can be achieved by connecting multiple SLIMLINE carriers in parallel. This enables power ratings of up to 300 kW to be achieved. The systems are integrated into 19" cabinet systems which can also house batteries and distribution units.

The SLIMLINE controller is available for more extensive control and monitoring functions.

SLIMLINE – cost-effective operation and maximum availability

Maximum availability
  • maximum availability
    • very high reliability
    • low mean time to repair (MTTR)
    • reliable hot swap modularity
    • decentralised parallel architecture
    • remote monitoring via TCP/IP
  • superior supply quality
    • sinusoidal input current, no reactive-power absorption (power factor ≥ 0.99)
Minimised operating costs
  • low operating costs
    • high efficiency up to 98% even at partial load
    • extremely high power density and, thus, low space requirements at the installation site
    • sustainable investment reliability through pay-as-you-grow
    • automatic synchronisation of the rectifier modules during replacement and retrofitting
    • low expenditure for installation, commissioning and expansion
Flexible component concept

Modular component concept

The modular concept significantly lowers the cost and time expenditure in the installation and maintenance of the new SLIMLINE telecommunications power supplies at wireless sites which are being newly built or converted.

Flexible scalability up to 300 kW

The SLIMLINE system is simply scalable and can grow in line with customer requirements up to 100 modules with a total output of 300 kW. Due to the high degree of modularisation, it is possible to plan, configure and deliver customised systems at very short notice. It is possible to combine rectifiers and inverters in one system. Both system components are monitored and configured by the MCU 3000 on a common interface.

 

Hot plug

All modules can be replaced during ongoing operation (hot plug). The SLIMLINE carrier with the appropriate quantity of rectifier modules and the assigned battery and consumer distribution create a complete, modular SLIMLINE power supply system.

Maximum operational reliability, minimum operating costs

Rectifier SLIMLINE 3000 NG power density improved - rectifier comparison
In this series, the power density is 60% improved on the previous model

The newly developed SLIMLINE power supply solutions are precisely tailored to the requirements of the telecommunications network operator. They include:

  • optimum operational reliability
  • maximum energy efficiency
  • optimum user space
  • flexibility (pay as you grow)
  • modularity

They not only contribute significantly to the low total cost of ownership (TCO), they are also the basis for a clear reduction in installation and assembly times, as well as for simpler and more efficient maintenance possibilities in later operation.

Only one type of rectifier is required for systems within a power range of 3 kW to 300 kW. This simplifies stock management and logistics for the benefit of the owner as it is only required to keep one type of module in stock for all systems.

Optimum energy efficiency in the minimum user space

Individual rectifier modules with an output of 3000 W are available for creating complete power supply systems. The 19" 1H carrier can accommodate either four 48 V / 3000 W rectifier modules combined with a monitoring and control unit (SLIMLINE controller) or five rectifier modules. This gives a power rating of 12 kW or 15 kW per rack.

Rectifier SLIMLINE NG efficiency output power - curve
Efficiency in relation to the output power

In this series of high-efficiency rectifiers, the power loss which occurs in the transformation of energy from alternating current to direct current has been reduced by up to 30% compared to the previous model. At the same time, the overall physical footprint of the rectifiers has been reduced by more than 33%.

A particularly impressive fact is that the SLIMLINE series works at efficiency in excess of 98% across a load range of between 20% and 90%.

This creates substantial savings for telecommunications service providers which operate a number of systems in the field. Optionally, active power management can be enabled which determines the load required and automatically connects or disconnects the rectifier modules accordingly.

SLIMLINE controller – remote monitoring and reliability in a very compact space

The SLIMLINE controller is available for extensive control and monitoring functions. This is generally inserted into the SLIMLINE carrier as a module in the case of low power ratings. The 19" 1H carrier can accommodate either four 48 V / 3000 W rectifier modules combined with a controller module or five rectifier modules. In the case of power supplies with a greater power rating, the monitoring and control unit can be integrated into the cabinet door of the power supply system.

The controller monitors the entire power supply system and controls the power management for example. The system is structured to ensure that the power supply remains operational in the event of controller failure. The rectifiers continue to supply the system and the batteries, which is why the power remains at 100%. Therefore, failure is not critical to the process, and there is no need for controller redundancy. This lessens the space required and reduces investment and operating costs. Needless to say, a message appears in the event of a controller failure so that prompt steps can be taken to have the controller module replaced by a service technician at short notice.

Controller module SLIMLINE display - rectifier industry
The front of the new SLIMLINE controller module has a 1.8" display, a USB 2.0 port (to accommodate a WLAN stick, for instance), as well as an Ethernet port
Controller module SLIMLINE touch display - rectifier industry
In the case of systems with a larger power rating, the system controller (MCU 3000) can be inserted into the cabinet door of the power supply system. This design has a 10.4" touch display

It is easy to operate by computer, tablet or smartphone

In the case of the SLIMLINE controller modules which are inserted in the carrier, a large number of components are integrated on just a fifth of the 19" width, so the module offers interfaces for e.g. SNMP, modbus, modem, ethernet and USB for connecting a WLAN adapter.

The system can be configured via the integrated colour display on the front. If there is a mobile device or computer available, the configuration can take place conveniently via a network connection and Internet browser. There is no further software required. By consistently matching operation to the requirements of the user delivers all the most beneficial measurements and settings with clarity, precision and simplicity.

The high contrast, bright display of the SLIMLINE controller also functions as a visual alert. If a fault occurs, it is fully illuminated in red and is clearly visible from a distance.

Controller module SLIMLINE connectivity - rectifier industry
The SLIMLINE controller module accommodates five methods of connectivity on only one sixth of its 19" width; they existed individually in the previous model and required additional space.

Further Information

Brochures
Case Studies

Your contact persons

Where are you from? Select your country of origin from the list below, to quickly find your personal contact person.

BENNING Subsidiaries - Find your contact person by clicking on the corresponding flag.

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
tel

+49 2871 930

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Michael Vogt
tel

+49 2871 93170

web

www.benning.de

address

factory I
Münsterstr. 135-137
factory II
Robert-Bosch-Str. 20
46397 Bocholt
Deutschland

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Brüggen
tel

+49 2163 500994

fax

+49 2163 952445

address

Deichweg 64
41379 Brüggen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Nord
tel

+49 33708 31874

fax

+49 33708 31876

address

Ludwig-Erhard-Ring 18a
15827 Dahlewitz
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung West
tel

+49 2871 93513

fax

+49 2871 936513

address

Auf der Brede 60
42477 Radevormwald
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Ost
tel

+49 35245 728544

tel

+49 172 2859286

address

01665 Klipphausen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Süd
tel

+49 8332 936363

fax

+49 8332 936364

address

Bahnhofstr. 26
87749 Hawangen
Germany

GER BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Niederlassung Soest
tel

+49 2921 9819020

fax

+49 2871 936211

address

59494 Soest
Germany

USA BENNING Power Electronics, Inc.
Service Helpdesk for Traction Chargers
tel

+1 888 296 0292

USA BENNING Power Electronics, Inc.
Technical Support Hotline
tel

+1 800 910 3601 Opt. 1

USA BENNING Power Electronics, Inc.
Hans E. Jensen [Regional Sales Manager - Industrial/Telecom]
mobile

+1 413 588 6356

USA BENNING Power Electronics, Inc.
Becky Thomas [Admin/HR Assistant]
tel

+1 214 553 1444 227

USA BENNING Power Electronics, Inc.
Michael Perone [VP Sales - Industrial]
tel

+1 740 548 0795

mobile

+1 740 953 2006

USA BENNING Power Electronics, Inc.
Charity Newman [Director of Operation]
tel

+1 214 553 1444 460

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
Kim Groves [Engineering/Inside Sales]
tel

+1 214 553 1444 221

mobile

+1 972 467 3973

USA BENNING Power Electronics, Inc.
Bob Geddie [Quality Manager/QMS]
tel

+1 214 553 1444 290

mobile

+1 214 793 7211

USA BENNING Power Electronics, Inc.
Greg Abbott [Director of Industrial Sales]
tel

+1 832 674 5756

USA BENNING Power Electronics, Inc.
David Almond [COO - Service / Telecom]
tel

+1 214 553 1444 233

mobile

+1 214 632 9583

USA BENNING Power Electronics, Inc.
James Beiersdorff [Sales Director - Motive Power]
tel

+1 214 553 1444 211

mobile

+1 972 342 7354

USA BENNING Power Electronics, Inc.
Tina Foster [Customer Service Manager]
tel

+1 214 553 1444 238

USA BENNING Power Electronics, Inc.
tel

+1 2 14 / 5 53 14 44

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
tel

+1 2 14 / 5 53 14 44

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
tel

+1 2 14 / 5 53 14 44

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

USA BENNING Power Electronics, Inc.
tel

+1 2 14 / 5 53 14 44

address

1220 Presidential Drive
Richardson, Texas 75081
U.S.A.

ARG BENNING Conversion de Energía
Ricardo Hartbrecht
tel

+54 911 4937 4987

address

(B1653CIO) Villa Ballester,
BUENOS AIRES

AUT BENNING GmbH Elektrotechnik und Elektronik
Vertrieb Österreich
tel

+43 (0) 2242-32416-0

web

www.benning.at

address

Eduard-Klinger-Str. 9
3423 St. Andrä-Wördern
Austria

BEL BENNING Belgium branch of BENNING Vertriebsges. mbH
tel

+32 (0) 2 / 5 82 87 85

address

Assesteenweg 65
1740 TERNAT
Belgium

BEL BENNING Belgium branch of BENNING Vertriebsges. mbH
Technical Support & Service
tel

+32 (0) 2 / 5 82 87 85

address

Assesteenweg 65
1740 TERNAT
Belgium

BLR OOO «BENNING Elektrotechnik und Elektronik»
tel

+375 162 512 512

address

Masherova Ave., 6A, 1003
224030 Brest
Belarus

BLR OOO «BENNING Elektrotechnik und Elektronik»
tel

+375 162 512 512

address

Masherova Ave., 6A, 1003
224030 Brest
Belarus

BRA BENNING Conversión de Energía S. A.
Paulo C. Anacleto [Manager – Brazil]
tel

+55 19 98270 0303

address

Campinas BRAZIL

CRO BENNING Zagreb d.o.o.
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CRO BENNING Zagreb d.o.o.
Kresimir Kauric
tel

0038516312280

address

Trnjanska 61
10000 Zagreb
Croatia

CZE BENNING CR, s.r.o.
tel

+420 / 3 26 72 10 03

address

Zahradní ul. 894
293 06 Kosmonosy
Czech Republic

CHN BENNING Power Electronics Beijing Co., Ltd.
tel

+86 (0) 10 / 61 56 85 88

fax

+86 (0) 10 / 61 50 62 00

address

No. 6 Guangyuan Dongjie
Tongzhou Industrial
Development Zone
101113 Beijing
P.R. China

FRA BENNING conversion d’énergie
tel

+33 (0) / 2 32 25 23 94

address

43, avenue Winston Churchill
B.P. 418
27404 Louviers Cedex
France

ARE BENNING Power Systems Middle East
Aznad Khaleel
tel

+971 (0)50 1766972

web

www.benning.fr

address

Office: 918,
9th Floor, AYA Business Center
ADNIC Building, Khalifa Street
Abu Dhabi
UAE

FRA BENNING conversion d’énergie
Bruno Guery
tel

+33 (0) 6 88 35 23 46

web

www.benning.fr

address

43, avenue Winston Churchill
B.P. 418
27404 Louviers Cedex
France

FRA BENNING conversion d’énergie
Cyrille Stremon
tel

+33 (0)6 46 71 42 60

web

www.benning.fr

GBR BENNING Power Electronics UK Ltd
Info
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
Great-Britain

GBR BENNING Power Electronics UK Ltd
Service
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
Great-Britain

GBR BENNING Power Electronics UK Ltd
Sales
tel

+44 (0) 1189 731506

address

BENNING Power Electronics (UK) Ltd.
Oakley House, Hogwood Lane
Finchampstead
Berkshire
RG 40 4QW
Great-Britain

GRE BENNING Hellas
BENNING Hellas
tel

+30 210 5741137

fax

+30 210 5782554

web

www.benning.gr

address

Chanion 1, Lykovrisi
141 23 Athens
Greece

HUN BENNING Kft. Power Electronics
tel

+36 (0) 33 / 50 76 00

address

Rákóczi út 145
2541 Lábatlan
Hungary

IRL Laor Energy (1993) L.T.D.
tel

+972 9 8912232

web

http://laor-energy.com

address

POB 5026
North Industrial Zone
60920 KADIMA

ITA BENNING Conversione di Energia S.r.L
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Caselecchio di Reno (BO)
Italy

ITA BENNING Conversione di Energia S.r.L
Giuliano Rossi
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Caselecchio di Reno (BO)
Italy

ITA BENNING Conversione di Energia S.r.L
Antonio Zanforlini
tel

+39 051 758800

address

Via Cimarosa, 81
40033 Caselecchio di Reno (BO)
Italy

NED BENNING NL branch of BENNING Vertriebsges. mbH
Technical Support & Service
tel

+31 (0) 30 / 6 34 60 13

address

Peppelkade 42
3992 AK Houten
Netherlands

NED BENNING NL branch of BENNING Vertriebsges. mbH
tel

+31 (0) 30 / 6 34 60 10

address

Peppelkade 42
3992 AK Houten
Netherlands

POL BENNING Power Electronics Sp. z o.o.
tel

+48 (0) 22 / 7 57 84 53

address

Korczunkowa 30
05-503 Glosków
Poland

POL BENNING Power Electronics Sp. z o.o.
Piotr Białoskórski
tel

48502189036

web

www.benning.biz

address

Korczunkowa 30
05-503 Glosków
Poland

RUS OOO BENNING Power Electronics
tel

+7 4 95 / 9 67 68 50

address

Domodedovo town,
microdistrict Severny,
"BENNING" estate, bldg.1
142000 Moscow Region
Russian Federation

RUS OOO BENNING Power Electronics
Филиал в г. Санкт-Петербург
tel

+7 812 346 43 66

web

www.benning.ru

address

197136, РФ, г. Санкт-Петербург,
ул. Ординарная, д.20, лит.А, пом. 12Н

RUS OOO BENNING Power Electronics
Филиал в г. Уфа
tel

+ 7 347 274 29 29

mobile

+ 7 347 246 33 74

web

www.benning.de

address

450057, РФ, г. Уфа,
ул. Заки Валиди, д.64/2, офис 406

RUS OOO BENNING Power Electronics
Cлужба технической поддержки
tel

+7 (495) 967 68 50 222

web

www.benning.ru

address

142000, РФ,
г. Домодедово, микрорайон Северный,
владение «Беннинг»,
стр. 1

RUS OOO BENNING Power Electronics
Филиал в г. Новосибирск
tel

+ 7 383 219 52 10

web

www.benning.ru

address

630087, РФ, г. Новосибирск,
ул. Немировича-Данченко, д.165, офис 324

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

SIN BENNING Power Electronics Pte Ltd
tel

+65 / 68 44 31 33

address

85, Defu Lane 10
#05-00
Singapore 539218

ESP BENNING Conversión de Energía S.A.
tel

+34 91 / 6 04 81 10

address

C/Pico de Santa Catalina 2
Pol. Ind. Los Linares
28970 Humanes, Madrid
Spain

SWE BENNING Sweden AB
Order och leveransinformation
tel

+46 (8) 623 95 16

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
Teknisk support, reservdelar
tel

+46 (8) 623 95 89

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SWE BENNING Sweden AB
tel

+46 (8) 6239500

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Sweden

SWE BENNING Sweden AB
Försäljning
tel

+46 (8) 623 95 79

address

Box 990, Hovslagarev. 33
19129 Sollentuna
Schweden

SVK BENNING Slovensko, s.r.o.
Oto Trnka
tel

+421 905 541 548

address

Šenkvická 3610/14W
90201 PEZINOK
Slowakei

SVK BENNING Slovensko, s.r.o.
tel

+421 (0) 2 / 44 45 99 42

address

Šenkvická 3610/14W
90201 PEZINOK
Slowakei

SUI BENNING Power Electronics GmbH
tel

+41 (0) 44 / 8 05 75 75

fax

+41 (0) 44 / 8 05 75 80

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

SUI BENNING Power Electronics GmbH
Jürg Badertscher
tel

+41 44 805 75 81

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

SUI BENNING Power Electronics GmbH
Pantelis Tasikas
tel

+41 44 805 75 74

fax

+41 44 805 75 80

web

www.benning.ch

address

Industriestrasse 6
8305 Dietlikon
Switzerland

TUR BENNING GmbH Turkey Liaison Office
Kenan Bilgin
tel

+90 216 4457146

address

19 Mayıs Mah. Kürkçü Sokak No: 16 / A
34736 Kozyatağı
Kadıköy / Istanbul
Turkey

UKR BENNING Power Electronics
tel

+38044 5014045

address

3 Sim'yi Sosninykh str.
03148 Kyiv
Ukraine

ARE BENNING Power Systems Middle East
Raman Pillai Harikumar United Arab Emirates
tel

+971 (0) 2 / 4 18 91 50

mobile

+971 545 987 987

address

Office: 918,
9th Floor, AYA Business Center
ADNIC Building, Khalifa Street
Abu Dhabi
UAE