TEBECHOP SE rectifier systems and DC converters

with modular technology, scalable, robust and cost-effective, well-suited to deal with industrial requirements

Gleichrichtersysteme-DC-Wandler-TEBECHOP_SE-Typen-Rectifier-systems-DC-converters-TEBECHOP_SE-Types

Maximum availability for essential areas of application in industry

In areas of industry where it is crucial for the operating systems to perform with maximum availability in the interests of safety and profitability, no shutdown periods can be allowed in the petrochemical industry, generation and distribution of energy and highly automated applications, including traffic management). In such areas, the plant, the control systems and the monitoring technology must be fully protected against failure or faults in the electrical supply.

It’s precisely here that battery-backed modular DC solutions operating in a parallel redundant mode have proven their worth. To such an extent that individual modules can even be swapped over without the need for interruption, quickly and straightforwardly. At the same time, these modular systems have proven their excellence in terms of the highest conceivable reliability, uncomplicated scalability, the maximum of flexibility, simple servicing and low operating costs.

With BENNING’s TEBECHOP SE product line, it offers a new generation of highly affordable modular rectifiers that meet the challenges of sensitive, process-critical systems to an unrivalled extent: capable of operating in parallel with lead-acid or NiCd energy storage when it comes to battery-supported standby power solutions.

Maximum availability,
maximum flexibility of application and investment,
minimum operating costs

  • first-class design and high quality components created to operate in harsher industrial conditions
  • n+1 (and/or n+r) redundancy
  • the reliability that comes with hot-plug technology
  • extensive range of alarm, status & monitoring functions, including Web-Interface via HTTP / HTTPS, SNMP, Modbus or Profibus, IEC 61850
  • high MTBF, low MTTR
  • sinusoidal mains current input / low input distortion
  • low output ripple and excellent dynamic output characteristics
  • cost-effectiveness and efficiency of operation even at partial-load
  • high output density, consequently taking up less footprint wherever it’s installed
  • can be operated with or without a battery
  • straightforward scalable system performance
Rectifier modules TEBECHOP 3000 SE 19inch - Module
19” rack insert with TEBECHOP 3000 SE rectifier modules Each rectifier module supplies a maximum output power of 1800 W or 3000 W. In one 19” rectifier rack shelf, up to 5 power modules can be installed, to provide a power output range from 1800 W up to 15,000 W.
Rectifier modules TEBECHOP 3000 SE 19inch convection cooled - Without Cooler
19” rack insert with convection-cooled TEBECHOP 3000 SE rectifier modules This convection-cooled rectifier series is specially designed for use in harsh ambient conditions (e.g. dust, acid, etc.). It is ideally suited for the severe conditions encountered in industrial applications, such as in the petrochemical industry, in power distribution and in traffic management applications.
Rectifier TEBECHOP 13500 SE 19inch industrial - Module
TEBECHOP 13500 SE: The industrial TEBECHOP 13500 SE rectifier module is particularly suitable for the construction of power supply systems with power consumption requirements in excess of 50 kW. This 3U height, 19”rack module has a 3-phase mains connection, active power factor correction (0.99 output factor) and constant a output power of 13,500 W.

Rectifier systems
Individual, flexible, robust

Diverse range of options for meeting customer requirements with BENNING’s modular rectifier systems, thanks to the range of housings available. There are wall-mounted or floor-standing enclosures, whilst smaller systems can use all-in-one cabinets which also accommodate the batteries. BENNING’s modular approach comprises a range of practical power supply and load distribution solutions for installation in the system cabinets. When it comes to battery and load distribution, BENNING supplies a range of suitable system cabinets which will also house the modules of the MCU 3000, Monitoring and Control Unit 3000.

Modular DC converters can be easily combined

The 1/5, 19” wide DC converters are ideal for modular systems. Not only are they based on the same mechanical platform but also the front panel design provides for inter-compatibility. This means that combinations of these modules can be easily installed in shared system cabinets.

DC power supply system 60kW range of housings - Rack
DC power supply systems of 60 kW, based on 4 rectifier rack units, each with 5 output modules (max. 15000 W output power).
Power supply system block diagram - Inverter-Rectifier
Block diagram illustrating the mode of operation of a modular-architecture power supply system with modular rectifiers, inverters and DC converters.

TEBECHOP SE industrial range ...
...ideally equipped for the challenges of today and the opportunities of tomorrow

Rectifier modules TEBECHOP 3000 SE convection cooled - Without Cooler
19“ rack insert with three convection-cooled TEBECHOP 3000 SE output modules, each with 1500 W output power.

Maximum availability and flexible power expansion (pay as you grow) on the basis of n + r redundancy
TEBECHOP SE rectifier systems combine straightforward, flexible power adjustment (scalability) with high availability and excellent energy efficiency. The essential building blocks of these rectifier systems are power modules with reliable hot-plug technology which can be increased when power output requirements increases. Redundant systems (e.g. n + r redundancy) can be designed in order to achieve additional uptime availability.

Rectifier modules TEBECHOP 3000 SE - Module
TEBECHOP SE 1/5 19” Modules

Low MTTR (Mean Times To Repair) and low maintenance and servicing costs
TEBECHOP SE rectifiers combine optimum reliability and shortest repair times in a system which meets the highest requirements for availability and quality in a reliable power supply system. Due to the “hot-swap” capability, each module can be easily replaced in less than 10 minutes. If replacement modules are available on site, the corresponding emergency intervention, or just routine servicing and repair tasks, can be readily carried out by the plant operator’s trained staff. On this basis, repair times (MTTR) can be minimized simultaneously combined with maximized system uptime.

TEBECHOP 3000 13500 SE efficiency output power GB - Diagram
High efficiency, even at partial load

High output in the most restricted space

Due to the compact dimensions (3U) of TEBECHOP SE modules and the low power loss due to high efficiency, you can operate up to ten TEBECHOP 13500 SE plug-in rectifiers with 135 kW of output power or fifty TEBECHOP 3000 SE modules with 150 kW of output power in a single system cabinet measuring 78 in x 24 in x 24 in (H x W x D).

High efficiency, even at partial load

TEBECHOP SE series rectifiers offer very high levels of efficiency even within the load range of 25% to 90%. In systems with a high output, significant savings in electrical power can be achieved using this highly efficient range of rectifiers.

Power supply system MCU 3000 10pinch touch screen - Schematic
MCU 3000 with 10” touch screen

Straightforward, safe operation combined with extensive reporting and monitoring functions

As an option, the MCU 3000 can be used for control and remote monitoring of the power supply systems. Controls are logically tailored to the user’s requirements, and offer clear, precise and comprehensive indication of all of the required readings and settings. The MCU’s advantages include an integrated web server and, in addition to remote maintenance which, for example, provided by BENNING’s 360° service solution, enables the option of connecting up to various network topologies.

On higher-output power systems, the MCU can be housed in the power supply system’s cabinet door. This version comprises a 10” touch screen. The MCU is also available as a 19” rack insert (1U). The front of the controller module then features a 1.8” display, a USB 2.0 interface (to accommodate a WLAN stick, for example) and an ethernet port.

Further Information

Brochures